Lathe Cutting Tools

Lathe cutting tools - LittleMachineShop.com

LittleMachineShop.com has cutting tools for your bench top lathe including presharpened and unsharpened high speed steel tool bits, cut-off blades, center drills, threading tools, and indexable tool bits.

5618 Chamfer Tool, 1/2" Indexable, SCSCR-08-3A, Tormach

Designation: SCSCR-08-3A
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 45°, 7° relief angle
Insert Shape: 80° (C)

Right hand Chamfer Tool. Includes wrenches and (1) insert.

5612 Chamfer Tool, 3/8" Indexable, SCSCR-06-2J, Tormach

Designation: SCSCR-06-2J
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 45°, 7° relief angle
Insert Shape: 80° (C)

45° Right hand Chamfer Tool. Includes wrench and (1) insert.

5109 Cut-Off Blade, 1/16", M2 HSS

M2 High Speed Steel
Width: .062", Height: .218", Length: 3"
Used on 5106, 5107, and 5130 grooving & cut-off tools

0.062" x 0.218" x 3" M2 HSS cut-off blade. This is a premium American-made M2 high speed steel cut-off blade from the Arthur R. Warner Co. This is a replacement blade for 5106, 5107, and 5130 grooving & cut-off tools. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5108 Cut-Off Blade, 1/32", M2 HSS

M2 High Speed Steel
Width: .032", Height: .218", Length: 3.0"
Used on 5106, 5107, and 5130 grooving & cut-off tools

0.032" x 0.218" x 3" M2 HSS cut-off blade. This is a premium American-made M2 high speed steel cut-off blade from the Arthur R. Warner Co. This is a replacement blade for 5106, 5107, and 5130 grooving & cut-off tools. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1929 Cut-Off Blade, P1

This blade is size P1.
High Speed Steel
Width: 1/16", Height: 1/2", Length: 4-1/2"

1/16" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance.

3415 Cut-Off Blade, P1 Carbide Tipped

This blade is size P1
Two micro grain carbide tips brazed on
High speed steel
Width: 1/16", Height: 1/2", Length: 4-1/2"

1/16" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance.

1728 Cut-Off Blade, P1, M2 HSS

This blade is size P1
High speed steel
Width: 1/16", Height: 1/2", Length: 4-1/2"

1/16" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance. This is a premium American-made M2 high speed steel cut-off blade from the Arthur R. Warner Co. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1930 Cut-Off Blade, P1N

This blade is size P1N
High speed steel
Width: 0.040", Height: 1/2", Length: 3-1/2"

0.040" x 1/2" x 3-1/2" M2 HSS lathe cut-off blade. These T-shape parting blades provide great side clearance.

1729 Cut-Off Blade, P1N, M2 HSS

This blade is size P1N
High speed steel
Width: 0.040", Height: 1/2", Length: 3-1/2"

0.040" x 1/2" x 3-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance. This is a premium American-made M2 high speed steel cut-off blade from the Arthur R. Warner Co. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1552 Cut-Off Blade, P1X

This blade is size P1X
High speed steel
Width: 5/64", Height: 1/2", Length: 4-1/2"

5/64" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance.

4993 Cut-Off Blade, P2 Indexable

This blade is size P2
Fits 0XA and AXA cut-off holders
Uses GTN-2, GTL-2 or GTR-2 inserts
Includes one GTN-2 insert

0.072" x 1/2" x 4-11/32" M2 HSS cut-off blade. GTN-2, GTL-2 or GTR-2 inserts have a 2mm (0.078") cutting width.

3864 Cut-Off Tool Holder and HSS Blade

Cut-off tool holder for mini lathe
P1 cut-off blade
The tool holder has a 3/8 shank.

This cut-off, or parting, tool holder fits in the standard 4-way tool post (and most other tool posts) and holds 1/2" tall cut-off blades. 1/16" x 1/2" x 4-1/2" M2 HSS cut-off blade. These T-shape parting blades provide great side clearance. This mini lathe tool holder is made of steel and has a 3/8 shank.

5916 Cut-Off Tool Holder, 3/8" Indexable with GTN-2 Inserts

3/8" Indexable GTN-2 Cut-Off Tool Holder
Includes: tool holder, cut-off blade, 10 inserts, 2 allen wrenches
Tool holder is a SLTBN0375-2
Uses GTN-2 Inserts
Cut-off blade NCIH 19-2

3/8" Indexable GTN-2 Cut-Off Tool Holder includes a SLTBN0375-2 tool holder, NCIH 19-2 cut-off blade, 10 GTN-2 inserts and 2 allen wrenches. Tool holder dimensions (see photo) A1 is 0.472" A is 0.984" H2 is 1.161" H4 is 0.435" M is 0.118" C is 2.2"

5917 Cut-Off Tool Holder, 5/16" Indexable with GTN-2 Inserts

5/16" Indexable GTN-2 Cut-Off Tool Holder
Includes: tool holder, cut-off blade, 10 inserts, 2 allen wrenches
Tool holder is a SLTBN0312-2
Uses GTN-2 Inserts
Cut-off blade NCIH 19-2

5/16" Indexable GTN-2 Cut-Off Tool Holder includes a SLTBN0312-2 tool holder, NCIH 19-2 cut-off blade, 10 GTN-2 inserts and 2 allen wrenches. Tool holder dimensions (see photo) A1 is 0.472" A is 0.984" H2 is 1.161" H4 is 0.435" M is 0.118" C is 2.2"

5431 Cut-Off Tool Holder, SGTHR9.5-2

Holder style 9.5-2
Uses GTN-2, GTL-2 or GTR-2 inserts
3/8" x 3/8" shank size
0.087" and 0.094" insert width
1.10" maximum work diameter

SGTHR9.5-2 cut-off tool holder style 9.5-2 has a 3/8" x 3/8" shank and holds inserts that are 0.087" and 0.094" in width. Self-gripping T-Cut style offers rigidity, stability and high reliability for superior straightness of cut. Maximum work diameter 1.10"

5617 Facing Tool, 1/2" Indexable, SCKCR-08-3A, Tormach

Designation: SCKCR-08-3A
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 75°, 7° relief angle
Insert Shape: 80° (C)

Right hand Facing Tool. Includes wrenches and (1) insert.

5611 Facing Tool, 3/8" Indexable, SCKCR-06-2J, Tormach

Designation: SCKCR-06-2J
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 75°, 7° relief angle
Insert Shape: 80° (C)

Right hand Facing Tool. Includes wrenches and (1) insert.

4819 Grooving & Cut-Off Tool, 1/2" Indexable HSS Inserts, A R Warner Kit #24

For external grooving and cut-off operations
Includes two 1/16" (.062") groover T-15 high speed steel inserts
Includes two 1/32" (.031") groover T-15 high speed steel inserts
Includes two 1/64" (.016") groover T-15 high speed steel inserts
Includes two IS 3007 screws and one T-9 wrench

This Arthur R. Warner Co. grooving and cut-off tool has a 0.500" shank and is 4.375" long. The maximum cutting depth of the groover inserts is approximately 0.25". This tool can be used for both right hand and left hand operations as it will accommodate an insert on either side of the tool. Each pair of inserts includes one left hand insert and one right hand insert. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5130 Grooving & Cut-Off Tool, 1/2" Shank, HSS Blade, A R Warner Kit #29

For external grooving and cutoff operations
Includes one 1/2" shank holder 3" overall length
Includes one 0.062" cut-off blade T-15 high speed steel
Includes One 7/64" Allen wrench

The blade is 0.218" tall and 3" long. Made in the US by the Arthur R. Warner Co. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

3572 Grooving & Cut-Off Tool, 3/8" Indexable HSS Inserts, A R Warner Kit #21

For external grooving and cut-off operations
Includes two 1/16" (.062") groover T-15 high speed steel inserts
Includes two 1/32" (.031") groover T-15 high speed steel inserts
Includes one 1/64" (.016") groover T-15 high speed steel insert
This lathe grooving tool includes two IS 3007 screws and one T-9 wrench

This Arthur R. Warner Co. indexable cut-off and grooving tool has a 0.375" shank and is 4.5" long. The maximum cutting depth of the groover inserts is approximately 0.25". The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5107 Grooving & Cut-Off Tool, 3/8" Shank, HSS Blade, A R Warner Kit #28

For external grooving and cutoff operations
Includes one 3/8" shank holder 3" overall length
Includes one 0.062" cut-off blade T-15 high speed steel
Includes one 7/64" Allen wrench

5106 Grooving & Cut-Off Tool, 5/16" Shank, HSS Blade, A R Warner Kit #27

For external grooving and cut-off operations
Includes one 5/16" shank holder 3" overall length
Includes one .062" cut-off blade T-15 high speed steel
Includes one 7/64" Allen wrench

This grooving & cut-off tool works in the standard 4-way tool post on the mini lathe. The blade is 0.218" tall and 3" long. Made in the US by the Arthur R. Warner Co. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5927 Grooving Tool Holder, 1/2" Shank, External MGEHR08-2

Right hand external grooving tool holder
Designation MEGHR08-2A
Shank size 1/2"
Overall length is 4"
Uses MGMN-200 Inserts

MGEHR08-2A external right hand grooving tool holder has a 1/2" x 1/2" shank. Tool holder design provides precision clamping & insert indexing accuracy. Ideal for external grooving, turning, part-off, reliefing & profile machining. Maximum cutting depth is 1/2". Overall length is 4".

5926 Grooving Tool Holder, 3/8" Shank, External MGEHR06-2

Right hand external grooving tool holder
Designation MEGHR06-2
Shank size 3/8"
Overall length is 3"
Uses MGMN-200 Inserts

MEGHR06-2 external right hand grooving tool holder has a 3/8" x 3/8" shank. Tool holder design provides precision clamping & insert indexing accuracy. Ideal for external grooving, turning, part-off, reliefing & profile machining. Maximum cutting depth is 1/2". Overall length is 3".

5613 Profiling Tool, 3/8" Indexable, SCMCN-06-2J, Tormach

Designation: SCMCN-06-2J
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 50°, 7° relief angle
Insert Shape: 80° (C)

Neutral hand Profile Tool. Includes wrenches and (1) insert.

5619 Profiling Tool, 1/2" Indexable, SCMCN-08-3A, Tormach

Designation: SCMCN-08-3A
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 50°, 7° relief angle
Insert Shape: 80° (C)

Neutral hand Profile Tool. Includes wrenches and one insert.

2431 Profiling Tool, 3/8" Indexable, 35 Deg Diamond Inserts, A R Warner Kit #15

3/8" square, 6" long profiling tool
Includes 2 HSS (VCMW-221) inserts
Includes 1 carbide (VCMT-221) insert
2 MS-1153 screws
1 T-7 torx wrench

This Arthur R. Warner Co. precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. This profiling tool is great for CNC applications, and can be used for most of your turning needs. Contents: 1 Right Hand bar 3/8 inch shank 6.0 inches overall length, side angle: 3 degree 2 Inserts T-15 High Speed Steel VCMW-221 Relief : 7 degree, IC: 0.250 inch, Thickness: 0.125 inch, Hole: 0.110 inch, Top opening: 0.146 inch, Radius: 0.015 inch 1 Insert Carbide VCMT-221 Relief : 7 degree, IC: 0.250 inch, Thickness: 0.125 inch, Hole: 0.110 inch Top opening: 0.146 inch, Radius: 0.015 inch Screws: (2) MS-1153 Wrench: T-7 The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

4820 Profiling Tools, 3/8" Indexable R / L, 35 Deg Diamond Inserts, A R Warner Kit #16

3/8" Square shank Right Hand profiling tool, 6" overall length
3/8" Square shank Left Hand profiling tool, 6" overall length
Includes 3 HSS (VCMW-221) inserts
Includes 1 carbide (VCMT-221) insert
1 extra MS-1153 Torx screw, 1 T-7 wrench

This Arthur R. Warner Co. precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. This profiling tool is great for CNC applications, and can be used for most of your turning needs. Contents: 1 Right Hand bar 3/8 inch shank, 6 inch overall length, Side angle: 3 degrees 1 Left Hand bar 3/8 inch shank, 6 inch overall length, Side angle: 3 degrees 3 Inserts T-15 High Speed Steel VCMW221, Relief : 7 degrees, IC: 0.250 inch, Thickness: 0.125 inch, Hole: 0.110 inch, Top opening: 0.146 inch, Radius: 0.015 inch 1 Insert Carbide VCMT221, Relief : 7 degree, IC: 0.250 inch, Thickness: 0.125 inch, Hole: 0.110 inch, Top opening: 0.146 inch, Radius: 0.015 inch Screws: (3) MS-1153 Wrench: T-7 The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

4115 Threading Tool Bit and Center Gage

5/16" HSS Threading Tool Bit
60 Degree Center Gage

The threading tool bit is sharpened on both ends to a 60° angle for threading. It is made from high speed steel. Both ends are offset, one so you can thread near a left shoulder, and the other so you can thread near a right shoulder. The center gage is made in the US by Products Engineering Corporation (PEC). The center gage is used for grinding and setting screw cutting tools. Scales with 14ths and 20ths graduations provided on one side, 24ths and 32nds on reverse side. Scales are used to determine number of threads per inch. The gage also features a table of double depths of thread for selecting size of tap drills. It is made of hardened spring tempered steel, with a protective satin chrome finish. All gaging surfaces are precision ground.

5438 Threading Tool, External, 1/2" Indexable, SER0500H11

Right hand external threading tool
1/2" shank
Includes: 1 tool holder, 10 11ERA60 TiN coated carbide inserts, 1 Torx wrench
Thread pitch range of 0.5-1.5 mm (16-48 TPI)

Complete with aluminum case. A60 inserts range is 0.5-1.5 mm (16-48 TPI). Overall length is 4".

3695 Threading Tool, External, 3/8" Indexable, HSS Triangle Inserts, A R Warner Kit #17

For external threading, 8 through 36 TPI
3/8" shank, 3/8" IC Inserts, 5" long
2 HSS inserts included: TNMC-32-NV and TPMC-32-NV
1 extra 4-40 flat head cap screw
1 - 1/16" Allen wrench

This Arthur R. Warner Co. precision threading tool will turn external threads. The tool can turn from 8 through 36 pitch, 60 degree threads. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5437 Threading Tool, External, 3/8" Indexable, SER0375E11

Right hand external threads cut
3/8" shank
Includes: 1 tool holder, 10 TiN coated A60 carbide inserts, 1 Torx wrench
A60 inserts range 0.5-1.5mm/16-48 TPI

Complete with aluminum case.

3467 Threading Tool, Int / Ext, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #18

For internal and external threading
1/2" shank, 3/8" IC Inserts, 5" long
2 inserts included: TNMC-32-NV and TPMC-32-NV
1 extra 4-40 flat head cap screw, 1 - 1/16" Allen wrench
For 8 through 36 pitch 60 degree threading

This A.R. Warner precision HSS threading tool will turn both internal and external threads. You can mount inserts on both ends. One end mounts the insert at the end of the tool for external threading. The mount on the other end is offset. Mount the insert one way for internal threading. Turn the insert around and you can use the tool for external threading too. The minimum bore diameter for internal threading is 1.375". The maximum thread depth of this internal and external threading tool is 0.100". The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products.

3571 Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #20

For internal threading
Includes three T-15 high speed steel TPMW-221 inserts
Includes two MS-1153 screws and one T-7 wrench

This Arthur R. Warner Co. boring bar for single-point cutting internal threads has 0.5" shank and is 6" long. Approximately 0.55" minimum hole size. Uses TPMW-221 and TPMW-222 inserts. The maximum thread depth is 0.100". The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5440 Threading Tool, Internal, 1/2" Indexable, SIR0500K11

Right hand internal threads cut
1/2" shank
Includes: 1 tool holder, 10 TiN coated carbide inserts, 1 Torx wrench
A60 inserts range 0.5-1.5mm/16-48 TPI

Complete with aluminum case. Minimum bore 0.60" (15.2 mm)

3570 Threading Tool, Internal, 3/8" Indexable, HSS Triangle Inserts, A R Warner Kit #19

For internal threading
Includes three T-15 high speed steel TPMW-1.8-1.5-.5 inserts
Includes two MS-1152S screws and one T-7 wrench

This Arthur R. Warner Co. boring bar for single-point cutting internal threads has 0.375" shank and is 5" long. This tool requires a 0.5" minimum hole size. Uses TPMW-1.8-1.5-.5 and TPMW-1.8-1.5-1 inserts. The maximum thread depth is 0.100". The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5439 Threading Tool, Internal, 3/8" Indexable, SIR0375H11

For right hand internal threads
3/8" x 4" shank
10 TiN coated 11IRA60 carbide inserts
Includes: 1 tool holder, 1 Torx wrench
A60 inserts cut 0.5-1.5mm/16-48 TPI threads

Complete with aluminum case. Minimum bore 0.47" (11.9 mm).

4516 Tool Bit Sharpening Training Set

Six presharpened 1/4" high speed steel tool bits
Five unsharpened 1/4" tool bits
Sharpening instructions

Learn how to grind tool bits with this set. The presharpened tool bits show you how the finished product should look. The unsharpened tool bits give you plenty of practice. The presharpened tool bits are ground in the same manner as hand-ground tool bits so they provide an example of how to properly grind tool bits. All the tool bits are M2 high speed steel. M2 is a high speed steel in the tungsten-molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. It is used to manufacture a variety of tools, such as drill bits, taps and reamers.

1966 Tool Bit, 1/4" 45 Degree Chamfer, Presharpened

1/4" Presharpened Tool Bit
High Speed Steel
45 Degree Chamfer

45 Degree chamfer presharpened 1/4" tool bit. Made from high speed steel.

1969 Tool Bit, 1/4" Cut-Off, Presharpened

1/4" Presharpened Tool Bit
High Speed Steel
Cut-Off Bit

Presharpened 1/4" cut-off, or parting tool bit. Made from high speed steel. This is a 1/4" square by 2 1/2" long tool bit with the end ground to a 0.1" wide parting blade.

1895 Tool Bit, 1/4" HSS Internal Threading
This 1/4" square high speed steel tool bit is pre-sharpened for internal threading. The internal threading tool bit has a 60 degree threading point ground on the side of the tool. It will comfortably reach 3/4" into a hole. The minimum bore diameter for internal threading is about 0.5".

1964 Tool Bit, 1/4" Left Hand, Presharpened

1/4" Presharpened Tool Bit
High Speed Steel
Left Handed

Left hand presharpened 1/4" tool bit. Made from high speed steel. A left hand tool cuts on the right side of the tool.

1965 Tool Bit, 1/4" Right Hand, Presharpened

1/4" Presharpened Tool Bit
High Speed Steel
Right Handed

Right hand presharpened 1/4" tool bit. Made from high speed steel. A right hand tool cuts on the left side of the tool.

1967 Tool Bit, 1/4" Round Nose, Presharpened

1/4" Presharpened Tool Bit
High Speed Steel
Round Nosed for Turning in Either Direction

Presharpened 1/4" round nose tool bit. High speed steel tool bit.

1155 Tool Bit, 1/4" x 2-1/2", M2 HSS

1/4" x 2-1/2" Tool Bit
M2 High Speed Steel

1/4" Square 2-1/2" Long HSS Tool Bit. These are imported tool bits made of M2 high speed steel.

1717 Tool Bit, 1/4" x 2-1/2", T-15 HSS, A R Warner

1/4 square 2-1/2 inch long
T-15 High Speed Steel
American Made

1/4" Square 2-1/2" Long HSS Tool Bit. These are American-made tool bits made of T-15 high speed steel.

1726 Tool Bit, 1/8" x 2-1/2" T-15 HSS, A R Warner

T-15 High Speed Steel
American Made

1/8" Square 2-1/2" Long HSS Tool Bit. These are American-made tool bits made of T-15 high speed steel.

1154 Tool Bit, 1/8" x 2-1/2", M2 HSS

1/8" x 2-1/2" Tool Bit
M2 High Speed Steel

1/8" Square 2-1/2" Long HSS Tool Bit. These are imported tool bits made of M2 high speed steel.

1153 Tool Bit, 3/16" x 2-1/2", M2 HSS

3/16" x 2-1/2" Tool Bit
M2 High Speed Steel

3/16" Square 2-1/2" Long HSSH High Speed Tool Bit. These M2 HSS square tool bits are imported and made of high speed steel.

1716 Tool Bit, 3/16" x 2-1/2", T-15 HSS, A R Warner

3/16 square 2-1/2 inch long
T-15 High Speed Steel
American Made

3/16" Square 2-1/2" Long HSS Tool Bit. These are American-made tool bits made of T-15 high speed steel.

1156 Tool Bit, 3/8" x 2-1/2", M2 HSS

3/8" x 2-1/2" Tool Bit
M2 High Speed Steel

3/8" Square 2-1/2" Long HSS Tool Bit. These are imported tool bits made of M2 high speed steel.

1718 Tool Bit, 3/8" x 3", T-15 HSS, A R Warner

3/8 square 3 inch long
T-15 High Speed Steel
American Made

3/8" Square 3" Long HSS Tool Bit. These are American-made tool bits made of T-15 high speed steel.

2221 Tool Bit, 5/16" HSS Threading
This threading tool bit is sharpened on both ends to a 60° angle for threading. It is made from high speed steel. Both ends are offset, one so you can thread near a left shoulder, and the other so you can thread near a right shoulder.

3193 Tool Bit, 5/16" Left Hand, Brazed Carbide

AL-5 Style turning tool
C6 Carbide tipped single point brazed tip
Overall length 2 1/4"
Left hand tool; cuts from left to right
Use for steel and steel alloys

These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too.

3192 Tool Bit, 5/16" Right Hand, Brazed Carbide

AR-5 Style turning tool
C6 Carbide tipped single point brazed tip
Overall length 2 1/4"
Right hand tool; cuts from right to left
Use for steel and steel alloys

These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too.

1152 Tool Bit, 5/16" x 2-1/2", M2 HSS

5/16" x 2-1/2" Tool Bit
M2 High Speed Steel

5/16" Square 2-1/2" Long HSS Tool Bit. These are imported lathe tool bits made of M2 high speed steel. The tool post on most mini lathes are sized to use 5/16" square tool bits.

1715 Tool Bit, 5/16" x 2-1/2", T-15 HSS, A R Warner

5/16 square 2-1/2 inch long
T-15 High Speed Steel
American Made
Fits most mini lathe tool posts

5/16" Square 2-1/2" Long HSS Tool Bit. These are American-made tool bits made of T-15 high speed steel. The tool post on most mini lathes are sized to use 5/16" tool bits.

2963 Tool Bit, Large Ball and Radius Turning Tool

Replacement bit for large ball and radius turning tool
1/4" Diameter
1-1/2" Long
High Speed Steel

This is a replacement tool bit for the large OMW ball and radius turning tool. The tool bit is 1/4" diameter and 1 1/2" long.

2964 Tool Bit, Small Ball and Radius Turning Tool

Replacement cutting bit small ball and radius turning tool
3/16" diameter
3/4" long
High Speed Steel

This is a replacement tool bit for the small OMW ball and radius turning tool. The tool bit is 3/16" diameter and 3/4" long.

4324 Tool Bits, 1/4" Presharpened, Individual Tool Bits

1/4" x 2-1/2" long HSS tool bits
Presharpened

These tool bits are made from high speed steel. These tool bits are ground in the same manner as hand-ground tool bits so they provide an example of how to properly grind tool bits.

2250 Tool Bits, 1/4" Presharpened, Set of 6

Six pre-sharpened 1/4" high speed steel tool bits
Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off

These tool bits are made from high speed steel. These tool bits are ground in the same manner as hand-ground tool bits so they provide an example of how to properly grind tool bits.

6286 Tool Bits, 1/4" Presharpened, Set of 8 HSS

1/4 X 2-1/2" 8 Piece High Speed Steel Lathe Turning Tool Set
M-2 high speed steel.
supplied in vinyl pouch.

Set includes No.1 Left-Hand Turning Tool (80°), No.2 Right-Hand Turning Tool (80°), No.3 Straight Finishing Tool, No.4 Corner (45°) Tool, No.5 Parting Tool, No.6 Boring Tool, No.7 Threading (60°) Tool, No.8 Corner (60°) Tool.

6288 Tool Bits, 3/8" Presharpened, Set of 8 HSS

3/8 X 4" 8 Piece High Speed Steel Lathe Turning Tool Set
M-2 high speed steel.
supplied in vinyl pouch

2412 Tool Bits, 5/16" Brazed Carbide, Set of 5

5 piece cutting tool set
5/16" (8mm) shanks
Carbide cutting tips
Variety of tips for roughing, straight and facing cuts and parting-off
Ideal for mini lathes

This set includes five different brazed carbide turning tools. The shanks are 5/16" (8mm) which is the right size for the mini lathe. This set includes one each of the following tool bits: DIN 4971R (ISO1) Straight cutter for rough turning DIN 4975 (ISO10) Pointed tip for straight turning DIN 4980R (ISO6) Right angle cutter - offset side cutter for facing DIN 4980L (ISO6) Left angle cutter - offset side cutter for facing DIN 4981R (ISO7) Parting-off cutter

4142 Tool Bits, 5/16" M2 HSS, 10 Pieces

10 tool bits
5/16" Square 2-1/2 Long
M2 high speed steel

5/16" Square 2-1/2 Long HSS Tool Bits. These are imported tool bits made of M2 high speed steel. The tool post on most mini lathes are sized to use 5/16" tool bits.

6287 Tool Bits, 5/16" Presharpened, Set of 8 HSS

5/16 X 3-1/8" 8 Piece High Speed Steel Lathe Turning Tool Set
M-2 high speed steel.
supplied in vinyl pouch.

4322 Tool Bits, M2 High Speed Steel, Individual Sizes

2-1/2" long M2 HSS tool bits

M2 is a high speed steel in the tungsten-molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. It is used for a variety of tools, such as drill bits, taps and reamers.

4323 Tool Bits, T-15 High Speed Steel, Individual Sizes

2-1/2" long T-15 HSS tool bits

T-15 is a tungsten type super high speed steel containing high vanadium for excellent abrasion resistance and cobalt for good red hardness. AISI T-15 is ideal for cutting difficult to machine materials where high frictional heat is present.

3694 Turning & Boring Tools, 3/8" Indexable, HSS Inserts, A R Warner Kit #8

Right and left hand turning tools with 0.375" shank 3.5" long
Boring bar with 0.375" shank 5.0" overall length
Includes three T-15 HSS (CCMW21.51) inserts for turning
Includes two T-15 HSS (CEMW21.51) inserts for boring
Includes two MS-1152S screws, three MS-1153 screws and one T-7 wrench

This Arthur R. Warner Co. kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a 3/8" boring bar. The right hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders. The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5433 Turning & Boring Tools, 3/8" Indexable, Triangle Inserts

4 turning tools
1 - 6" boring tool
Inserts and torx wrenches
3/8" shank
Uses TCMT-21.51 inserts

Set comes in a fitted aluminum case.

5432 Turning & Boring Tools, 5/16" Indexable, Triangle Inserts

4 turning tools
1 boring tool
Inserts and torx wrenches
5/16" shank
Uses TCMT-1.81.51 Inserts

Set comes in a fitted aluminum case.

1435 Turning & Boring Tools, 8 mm Indexable, Diamond Inserts

7 piece indexable turning and boring set
8 mm tool shank
CCMT21.51 inserts included
Six turning tools, one boring bar
Carrying case and T8 wrench included

Turning and boring set with seven pieces. Each tool has an 8 mm tool shank and uses a CCMT21.51 ANSI (CCMT060204 ISO) indexable insert. Additional inserts are available with our part number 1781. CCMT diamond inserts have four cutting edges. See contents tab for what is included in this set. Set comes in a carrying case and a T8 wrench.

5434 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set

6 turning tools
1 cut-off blade
Inserts and torx wrenches
3/8" shank
Extra inserts and screws available

Seven 3/8" indexable tool set, six turning tools and 1 cut-off blade, torx wrenches and inserts. Set comes in a fitted aluminum case. Turning tools included are: SDNCN 6-2 holder using a DCMT insert (P/N 5640), and an M2.5 x 6 retaining screw (P/N 2696). SDJCR 6-2 holder using a DCMT insert (P/N 5640), and an M2.5 x 6 retaining screw (P/N 2696). SCLCL 6-2 holder using a CCMT insert (P/N 1781), and an M2.5 x 6 retaining screw (P/N 2696). SCLCR 6-2 holder using a CCMT insert (P/N 1781), and an M2.5 x 6 retaining screw (P/N 2696). SWGCR 6-5 holder using a WCMX050308R-53 Carbide insert (P/N 5641), and an M3 x 8 retaining screw (P/N 5645). SER 6-11 holder - using an 11ERA60 insert (P/N 5441), and an M2.5 x 6 retaining screw (P/N 2696). Cut-Off Blade: MGEHR06-02 - using a MGMN-200 insert (P/N 5642), and an M4 x 12 retaining screw (P/N 2687).

3693 Turning 1/4" & Boring 3/8" Indexable Tools, HSS Inserts, A R Warner Kit #4

Right and left hand turning tools with 0.250" shank 3.5" long
Boring bar with 0.375" shank 5.0" overall length
Includes three T-15 HSS (CCMW21.51) inserts for turning
Includes two T-15 HSS (CEMW21.51) inserts for boring
Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench

This Arthur R. Warner Co. kit includes a 1/4" right-hand turning tool, a 1/4" left-hand turning tool, and a 3/8" boring bar. The right hand turning bar has a 0.250” shank, and is 3.50” in overall length. The left hand turning bar has a 0.250” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders. The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

5616 Turning and Facing Tool, 1/2" Indexable, SCLCL-08-3A, Tormach

Designation: SCLCL-08-3A (Left)
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 95°, 7° relief angle
Insert Shape: 80° (C)

Left hand Turning/Facing Tool. Includes wrenches and (1) insert.

5615 Turning and Facing Tool, 1/2" Indexable, SCLCR-08-3A, Tormach

Designation: SCLCR-08-3A
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 95°, 7° relief angle
Insert Shape: 80° (C)

Right hand Turning/Facing Tool. Includes wrenches and (1) insert.

5614 Turning and Facing Tool, 3/8" Indexable, SCBCR-06-2J, Tormach

Designation: SCBCR-06-2J
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 75°, 7° relief angle
Insert Shape: 80° (C)

Right hand Turning Tool. Includes wrenches and (1) insert.

5610 Turning and Facing Tool, 3/8" Indexable, SCLCL-06-2J, Tormach

Designation: SCLCL-06-2J (Left)
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 95°, 7° relief angle
Insert Shape: 80° (C)

Left hand Turning/Facing Tool. Includes wrenches and (1) insert.

5609 Turning and Facing Tool, 3/8" Indexable, SCLCR-06-2J, Tormach

Designation: SCLCR-06-2J
Steel shank 3/8" x 3-1/2"
Designed for CCMT and CCGT 21.51 inserts
Approach 95°, 7° relief angle
Insert Shape: 80° (C)

Right hand Turning/Facing Tool. Includes wrenches and (1) insert.

5620 Turning Tool, 1/2" Indexable, SCBCR-08-3A, Tormach

Designation: SCBCR-08-3A
Steel shank 1/2" x 4"
Designed for CCMT and CCGT 32.51 inserts
Approach 75°, 7° relief angle
Insert Shape: 80° (C)

Right hand Turning Tool. Includes wrenches and (1) insert.

3569 Turning Tools, 1/2" Indexable, 80 Deg Diamond HSS Inserts, A R Warner Kit #11

Right hand tool holder
Left hand tool holder, double ended
Includes five T-15 HSS (CCMW32.52) inserts
Includes four MS-1155 screws and one T-15 wrench

Right hand bar has 0.5" shank and is 4" long. Left hand bar has 0.5" shank and is 4" long. It includes a second insert pocket that provides a 50° side cutting edge. Uses CCMW32.51 and CCMW32.52 inserts. The second insert pocket on the left hand tool provides a way to use the second and fourth corners on the diamond insert. Made by A R Warner. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1620 Turning Tools, 1/2" Indexable, HSS Triangle Inserts, A R Warner Kit #9

5 metal turning tools 1/2" shank, 4" overall length
Tool styles are AR, AL, BR, BL, & E
6 turning inserts, TPMB-322
6 screws
1 - 1/16" Allen wrench

This Arthur R. Warner Co. precision tool holder kit uses HSS, combining the advantages of high speed steel cutting tools with the convenience of indexable tooling. The kit contains the following: 5 1/2" indexable turning tool bars and shank 4 inches overall length 6 Turning Inserts: T-15 High Speed Steel TPMB-322 (TD6P) 6 4-40FH screws and one 1/16" hex wrench. The TPMB322 insert: Relief : 11 degree IC: .375 inch Thickness: .125 inch Hole: .150 inch Top opening: .250 inch Radius: .031 inch Each tool holder is a different style. There is one each of the following: Style AR right hand tool Style BR right hand tool with a 15° lead angle Style E Neutral threading tool with 60° included angle Style BL left hand tool with a 15° lead angle Style AL left hand tool The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products.

2286 Turning Tools, 1/2" Indexable, Triangle Inserts

5 piece turning tool set
1/2" square shank
5 spare screws included
Two wrenches
TPGH-32.51 carbide inserts

This set of indexable turning tools includes 5 tools (AR, AL, BR, BL, E), carbide inserts, wrenches, and extra screws. It comes in a fitted case. Style AR right hand tool Style BR right hand tool with a 15° lead angle Style E Neutral threading tool with 60° included angle Style BL left hand tool with a 15° lead angle Style AL left hand tool Carbide inserts are TPGH-32.51. If you prefer high speed steel inserts, use TPMB inserts: #1623 TPMB-321 or #1622 TPMB-322.

1719 Turning Tools, 1/4" Indexable, HSS Triangle Inserts, A R Warner Kit #1

5 piece turning tool set
1/4" square shank 3.5" overall length
6 screws included
T-7 wrench
TPMW1.81.51 HSS inserts

This Arthur R. Warner Co. precision tool holder kit uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. The kit contains the following: 5 bars 1/4 inch shank 3.50 inches overall length 6 T-15 HSS TPMW1.81.51 Inserts Relief : 11 degree, IC: .218 inch, Thickness: .093 inch, Hole: .110 inch Top opening: .146 inch @ 60 degrees, Radius: .015 inch Screws: (6) CO-2205 Wrench: T-7 The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1913 Turning Tools, 1/4" Indexable, Triangle Inserts

5 piece turning tool set
1/4" square shank
5 spare screws included
Two wrenches
TCMT carbide inserts

This set of indexable turning tools includes 5 tools (AR, AL, BR, BL, E), inserts, wrenches, and extra screws. It comes in a fitted case. Style AR right hand tool Style BR right hand tool with a 15° lead angle Style E Neutral threading tool with 60° included angle Style BL left hand tool with a 15° lead angle Style AL left hand tool Carbide inserts are TCMT-1.81.51.

4132 Turning Tools, 3/8" Indexable, Carbide, Triangle Inserts, A R Warner

3 piece turning tool set
3/8" square shank
3 TCMT21.52 inserts
1 TCMT21.51 insert
Torx wrench and 4 screws

This Arthur R. Warner Co. precision tool holder kits use carbide or high speed steel inserts. These are production quality tool holders that are made in the USA. The kit contains the following: AR and AL tool holders with TCMT21.52 inserts E threading tool holder with TCMT21.51 insert 1 extra TCMT21.52 carbide insert 1 extra Torx screw 1 Torx wrench Note that TCMW21.51 and TCMW21.52 high speed steel inserts also fit these tool holders. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1619 Turning Tools, 3/8" Indexable, HSS Triangle Inserts, A R Warner Kit #5, Set of 5

5 piece turning tool set
3/8" square shank 3.5" overall length
6 screws (MS-1153) (5 installed on the bits, 1 extra)
T-7 wrench
6 TPMW-222 HSS inserts (5 installed on the bits, 1 extra)

This Arthur R. Warner Co. precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. The kit contains the following: 5 Turning bars 3/8 inch shank 3.50 inches overall length 6 Inserts (Turning) T-15 High Speed Steel TPMW-222 Relief : 11 degree, IC: .250 inch, Thickness: .125 inch, Hole: .110 inch Top opening: .146 inch @ 60 degrees, Radius: .031 inch Screws: (6) MS-1153 Wrench: T-7 The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel (and tool steel). Their quality is excellent and LittleMachineShop.com is proud to carry their products.

1669 Turning Tools, 3/8" Indexable, Triangle Inserts

5 piece set of lathe turning tools
3/8" square shank
Extra screws included
Two wrenches
TCMT21.51 carbide inserts

This set of indexable turning tools includes 5 indexable tools (AR, AL, BR, BL, E), inserts, a wrench, and extra screws. It comes in a wooden case. Style AR right hand tool Style BR right hand tool with a 15° lead angle Style E Neutral threading tool with 60° included angle Style BL left hand tool with a 15° lead angle Style AL left hand tool The carbide inserts are TCMT-21.51.