LittleMachineShop.com has cutting tools for your bench top lathe including presharpened and unsharpened high speed steel tool bits, cut-off blades, center drills, threading tools, and indexable tool bits.
|
- Designation: SCSCR-08-3A
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 45°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCSCR-06-2J
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 45°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- M2 High Speed Steel
- Width: .062", Height: .218", Length: 3"
- Used on 5106, 5107, and 5130 grooving & cut-off tools
|
|
- M2 High Speed Steel
- Width: .032", Height: .218", Length: 3.0"
- Used on 5106, 5107, and 5130 grooving & cut-off tools
|
|
- This blade is size P1.
- High Speed Steel
- Width: 1/16", Height: 1/2", Length: 4-1/2"
|
|
- This blade is size P1
- Two micro grain carbide tips brazed on
- High speed steel
- Width: 1/16", Height: 1/2", Length: 4-1/2"
|
|
- This blade is size P1
- High speed steel
- Width: 1/16", Height: 1/2", Length: 4-1/2"
|
|
- This blade is size P1N
- High speed steel
- Width: 0.040", Height: 1/2", Length: 3-1/2"
|
|
- This blade is size P1N
- High speed steel
- Width: 0.040", Height: 1/2", Length: 3-1/2"
|
|
- This blade is size P1X
- High speed steel
- Width: 5/64", Height: 1/2", Length: 4-1/2"
|
|
- This blade is size P2
- Fits 0XA and AXA cut-off holders
- Uses GTN-2, GTL-2 or GTR-2 inserts
- Includes one GTN-2 insert
|
|
- Cut-off tool holder for mini lathe
- P1 cut-off blade
- The tool holder has a 3/8 shank.
|
|
- 3/8" Indexable GTN-2 Cut-Off Tool Holder
- Includes: tool holder, cut-off blade, 10 inserts, 2 allen wrenches
- Tool holder is a SLTBN0375-2
- Uses GTN-2 Inserts
- Cut-off blade NCIH 19-2
|
|
- 5/16" Indexable GTN-2 Cut-Off Tool Holder
- Includes: tool holder, cut-off blade, 10 inserts, 2 allen wrenches
- Tool holder is a SLTBN0312-2
- Uses GTN-2 Inserts
- Cut-off blade NCIH 19-2
|
|
- Holder style 9.5-2
- Uses GTN-2, GTL-2 or GTR-2 inserts
- 3/8" x 3/8" shank size
- 0.087" and 0.094" insert width
- 1.10" maximum work diameter
|
|
- Designation: SCKCR-08-3A
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 75°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCKCR-06-2J
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 75°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- For external grooving and cut-off operations
- Includes two 1/16" (.062") groover T-15 high speed steel inserts
- Includes two 1/32" (.031") groover T-15 high speed steel inserts
- Includes two 1/64" (.016") groover T-15 high speed steel inserts
- Includes two IS 3007 screws and one T-9 wrench
|
|
- For external grooving and cutoff operations
- Includes one 1/2" shank holder 3" overall length
- Includes one 0.062" cut-off blade T-15 high speed steel
- Includes One 7/64" Allen wrench
|
|
- For external grooving and cut-off operations
- Includes two 1/16" (.062") groover T-15 high speed steel inserts
- Includes two 1/32" (.031") groover T-15 high speed steel inserts
- Includes one 1/64" (.016") groover T-15 high speed steel insert
- This lathe grooving tool includes two IS 3007 screws and one T-9 wrench
|
|
- For external grooving and cutoff operations
- Includes one 3/8" shank holder 3" overall length
- Includes one 0.062" cut-off blade T-15 high speed steel
- Includes one 7/64" Allen wrench
|
|
- For external grooving and cut-off operations
- Includes one 5/16" shank holder 3" overall length
- Includes one .062" cut-off blade T-15 high speed steel
- Includes one 7/64" Allen wrench
|
|
- Right hand external grooving tool holder
- Designation MEGHR08-2A
- Shank size 1/2"
- Overall length is 4"
- Uses MGMN-200 Inserts
|
|
- Right hand external grooving tool holder
- Designation MEGHR06-2
- Shank size 3/8"
- Overall length is 3"
- Uses MGMN-200 Inserts
|
|
- Designation: SCMCN-06-2J
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 50°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCMCN-08-3A
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 50°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- 3/8" square, 6" long profiling tool
- Includes 2 HSS (VCMW-221) inserts
- Includes 1 carbide (VCMT-221) insert
- 2 MS-1153 screws
- 1 T-7 torx wrench
|
|
- 3/8" Square shank Right Hand profiling tool, 6" overall length
- 3/8" Square shank Left Hand profiling tool, 6" overall length
- Includes 3 HSS (VCMW-221) inserts
- Includes 1 carbide (VCMT-221) insert
- 1 extra MS-1153 Torx screw, 1 T-7 wrench
|
|
- 5/16" HSS Threading Tool Bit
- 60 Degree Center Gage
|
|
- Right hand external threading tool
- 1/2" shank
- Includes: 1 tool holder, 10 11ERA60 TiN coated carbide inserts, 1 Torx wrench
- Thread pitch range of 0.5-1.5 mm (16-48 TPI)
|
|
- For external threading, 8 through 36 TPI
- 3/8" shank, 3/8" IC Inserts, 5" long
- 2 HSS inserts included: TNMC-32-NV and TPMC-32-NV
- 1 extra 4-40 flat head cap screw
- 1 - 1/16" Allen wrench
|
|
- Right hand external threads cut
- 3/8" shank
- Includes: 1 tool holder, 10 TiN coated A60 carbide inserts, 1 Torx wrench
- A60 inserts range 0.5-1.5mm/16-48 TPI
|
|
- For internal and external threading
- 1/2" shank, 3/8" IC Inserts, 5" long
- 2 inserts included: TNMC-32-NV and TPMC-32-NV
- 1 extra 4-40 flat head cap screw, 1 - 1/16" Allen wrench
- For 8 through 36 pitch 60 degree threading
|
|
- For internal threading
- Includes three T-15 high speed steel TPMW-221 inserts
- Includes two MS-1153 screws and one T-7 wrench
|
|
- Right hand internal threads cut
- 1/2" shank
- Includes: 1 tool holder, 10 TiN coated carbide inserts, 1 Torx wrench
- A60 inserts range 0.5-1.5mm/16-48 TPI
|
|
- For internal threading
- Includes three T-15 high speed steel TPMW-1.8-1.5-.5 inserts
- Includes two MS-1152S screws and one T-7 wrench
|
|
- For right hand internal threads
- 3/8" x 4" shank
- 10 TiN coated 11IRA60 carbide inserts
- Includes: 1 tool holder, 1 Torx wrench
- A60 inserts cut 0.5-1.5mm/16-48 TPI threads
|
|
- Six presharpened 1/4" high speed steel tool bits
- Five unsharpened 1/4" tool bits
- Sharpening instructions
|
|
- 1/4" Presharpened Tool Bit
- High Speed Steel
- 45 Degree Chamfer
|
|
- 1/4" Presharpened Tool Bit
- High Speed Steel
- Cut-Off Bit
|
|
This 1/4" square high speed steel tool bit is pre-sharpened for internal threading.
The internal threading tool bit has a 60 degree threading point ground on the side of the tool. It will comfortably reach 3/4" into a hole.
The minimum bore diameter for internal threading is about 0.5".
|
|
- 1/4" Presharpened Tool Bit
- High Speed Steel
- Left Handed
|
|
- 1/4" Presharpened Tool Bit
- High Speed Steel
- Right Handed
|
|
- 1/4" Presharpened Tool Bit
- High Speed Steel
- Round Nosed for Turning in Either Direction
|
|
- 1/4" x 2-1/2" Tool Bit
- M2 High Speed Steel
|
|
- 1/4 square 2-1/2 inch long
- T-15 High Speed Steel
- American Made
|
|
- T-15 High Speed Steel
- American Made
|
|
- 1/8" x 2-1/2" Tool Bit
- M2 High Speed Steel
|
|
- 3/16" x 2-1/2" Tool Bit
- M2 High Speed Steel
|
|
- 3/16 square 2-1/2 inch long
- T-15 High Speed Steel
- American Made
|
|
- 3/8" x 2-1/2" Tool Bit
- M2 High Speed Steel
|
|
- 3/8 square 3 inch long
- T-15 High Speed Steel
- American Made
|
|
This threading tool bit is sharpened on both ends to a 60° angle for threading.
It is made from high speed steel.
Both ends are offset, one so you can thread near a left shoulder, and the other so you can thread near a right shoulder.
|
|
- AL-5 Style turning tool
- C6 Carbide tipped single point brazed tip
- Overall length 2 1/4"
- Left hand tool; cuts from left to right
- Use for steel and steel alloys
|
|
- AR-5 Style turning tool
- C6 Carbide tipped single point brazed tip
- Overall length 2 1/4"
- Right hand tool; cuts from right to left
- Use for steel and steel alloys
|
|
- 5/16" x 2-1/2" Tool Bit
- M2 High Speed Steel
|
|
- 5/16 square 2-1/2 inch long
- T-15 High Speed Steel
- American Made
- Fits most mini lathe tool posts
|
|
- Replacement bit for large ball and radius turning tool
- 1/4" Diameter
- 1-1/2" Long
- High Speed Steel
|
|
- Replacement cutting bit small ball and radius turning tool
- 3/16" diameter
- 3/4" long
- High Speed Steel
|
|
- 1/4" x 2-1/2" long HSS tool bits
- Presharpened
|
|
- Six pre-sharpened 1/4" high speed steel tool bits
- Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off
|
|
- 1/4 X 2-1/2" 8 Piece High Speed Steel Lathe Turning Tool Set
- M-2 high speed steel.
- supplied in vinyl pouch.
|
|
- 3/8 X 4" 8 Piece High Speed Steel Lathe Turning Tool Set
- M-2 high speed steel.
- supplied in vinyl pouch
|
|
- 5 piece cutting tool set
- 5/16" (8mm) shanks
- Carbide cutting tips
- Variety of tips for roughing, straight and facing cuts and parting-off
- Ideal for mini lathes
|
|
- 10 tool bits
- 5/16" Square 2-1/2 Long
- M2 high speed steel
|
|
- 5/16 X 3-1/8" 8 Piece High Speed Steel Lathe Turning Tool Set
- M-2 high speed steel.
- supplied in vinyl pouch.
|
|
- 2-1/2" long M2 HSS tool bits
|
|
- 2-1/2" long T-15 HSS tool bits
|
|
- Right and left hand turning tools with 0.375" shank 3.5" long
- Boring bar with 0.375" shank 5.0" overall length
- Includes three T-15 HSS (CCMW21.51) inserts for turning
- Includes two T-15 HSS (CEMW21.51) inserts for boring
- Includes two MS-1152S screws, three MS-1153 screws and one T-7 wrench
|
|
- 4 turning tools
- 1 - 6" boring tool
- Inserts and torx wrenches
- 3/8" shank
- Uses TCMT-21.51 inserts
|
|
- 4 turning tools
- 1 boring tool
- Inserts and torx wrenches
- 5/16" shank
- Uses TCMT-1.81.51 Inserts
|
|
- 7 piece indexable turning and boring set
- 8 mm tool shank
- CCMT21.51 inserts included
- Six turning tools, one boring bar
- Carrying case and T8 wrench included
|
|
- 6 turning tools
- 1 cut-off blade
- Inserts and torx wrenches
- 3/8" shank
- Extra inserts and screws available
|
|
- Right and left hand turning tools with 0.250" shank 3.5" long
- Boring bar with 0.375" shank 5.0" overall length
- Includes three T-15 HSS (CCMW21.51) inserts for turning
- Includes two T-15 HSS (CEMW21.51) inserts for boring
- Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench
|
|
- Designation: SCLCL-08-3A (Left)
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 95°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCLCR-08-3A
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 95°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCBCR-06-2J
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 75°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCLCL-06-2J (Left)
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 95°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCLCR-06-2J
- Steel shank 3/8" x 3-1/2"
- Designed for CCMT and CCGT 21.51 inserts
- Approach 95°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Designation: SCBCR-08-3A
- Steel shank 1/2" x 4"
- Designed for CCMT and CCGT 32.51 inserts
- Approach 75°, 7° relief angle
- Insert Shape: 80° (C)
|
|
- Right hand tool holder
- Left hand tool holder, double ended
- Includes five T-15 HSS (CCMW32.52) inserts
- Includes four MS-1155 screws and one T-15 wrench
|
|
- 5 metal turning tools 1/2" shank, 4" overall length
- Tool styles are AR, AL, BR, BL, & E
- 6 turning inserts, TPMB-322
- 6 screws
- 1 - 1/16" Allen wrench
|
|
- 5 piece turning tool set
- 1/2" square shank
- 5 spare screws included
- Two wrenches
- TPGH-32.51 carbide inserts
|
|
- 5 piece turning tool set
- 1/4" square shank 3.5" overall length
- 6 screws included
- T-7 wrench
- TPMW1.81.51 HSS inserts
|
|
- 5 piece turning tool set
- 1/4" square shank
- 5 spare screws included
- Two wrenches
- TCMT carbide inserts
|
|
- 3 piece turning tool set
- 3/8" square shank
- 3 TCMT21.52 inserts
- 1 TCMT21.51 insert
- Torx wrench and 4 screws
|
|
- 5 piece turning tool set
- 3/8" square shank 3.5" overall length
- 6 screws (MS-1153) (5 installed on the bits, 1 extra)
- T-7 wrench
- 6 TPMW-222 HSS inserts (5 installed on the bits, 1 extra)
|
|
- 5 piece set of lathe turning tools
- 3/8" square shank
- Extra screws included
- Two wrenches
- TCMT21.51 carbide inserts
|