Clamping Kit, 7/16" T-Slot in Organizer Case
- Stud thread: 3/8"-16
- T-slot width at top: 7/16" (12 mm)
- 58 Pieces
- All parts are heat treated
- Organizer case included
Part Number: 1426
Weight: 14.0 lb
Weight: 14.0 lb
$62.95
On Sale
Regularly $69.95
58-piece clamping kit 3/8"-16, 7/16" T-Slot in organizer case.
This machinist clamping kit fits the 12 mm T-slots on the mini mill.
The t-slot clamp kit includes 24 3/8"-16 studs, 12 step blocks in pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 step clamps.
Comes in an organizer case.
The stated dimension of the clamping kit is the width at the top of the T-slot.
Chris' Tips
Measure the width at the top of the T-slot as shown in the photo below. This is the dimension given for T-slot nuts and clamping kits. For example, if you measure 0.468 at the top of the T-slot, you should get a 7/16” (0.438”) T-slot nut or clamping kit.
Following are the dimensions of the T-slot nuts that we sell separately or as part of a set.
*Indicates t-slot nuts included as part of a clamping kit.
|
Slot |
B |
Thread A |
C |
D |
E |
Length |
|
1/4" |
0.24" |
M5 |
0.23" |
0.10" |
0.38" |
0.38" |
|
3/8" |
0.37" |
5/16" - 18 |
0.50" |
0.19" |
0.63" |
0.88" |
|
7/16" |
0.43" |
3/8" - 16 |
0.50" |
0.28" |
0.69" |
0.88" |
|
1/2" |
0.49" |
3/8" - 16 |
0.50" |
0.28" |
0.88" |
0.88" |
|
5/8" |
0.61" |
1/2" - 13 |
0.63" |
0.34" |
1.00" |
1.13" |
|
6 mm |
5.7 mm |
M5 |
8.2 mm |
4 mm |
10 mm |
12 mm |
|
8 mm |
7.7 mm |
M6 |
10 mm |
5 mm |
13 mm |
13 mm |
|
10 mm |
9.7 mm |
M8 |
12 mm |
6 mm |
15 mm |
15 mm |
|
12 mm |
11.7 mm |
M10 |
12 mm |
7 mm |
18 mm |
18 mm |
Nominal Sizes for 7/16" T-Slot Nut
Suitable for 12 mm T-Slot tables on common mini mills.