Rotary Tables

Rotary tables - LittleMachineShop.com

We carry a full range of small rotary tables. There are index (dividing) plates available for all of our rotary tables if you want to do indexing. We also have tailstocks for all the rotary tables.

1440 Rotary Table DRO Conversion Kit

Conversion Kit for 4" Precision Rotary Table
Save money by upgrading your existing table to DRO

Convert the LittleMachineShop.com 4" Precision Rotary Table (P/N 1810) to a rotary table with digital read out (DRO). This conversion kit will essentially convert our #1810 rotary table to one like part number 2420. For existing owners of the #1810, this unit saves money by upgrading your existing table to DRO.

5601 Rotary Table, 3" H/V, Economy

Horizontal or vertical use
3" diameter table rotates 360°
1:36 ratio or 10° per handwheel revolution
Scale reads to 15 minutes
Low profile of 45.0 mm (1.77")

Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 45mm (1.77") in the horizontal position. This precision ground graded cast iron table is graduated for a full 360°. The handwheel utilizes a 1:36 ratio resulting in 10° per handwheel revolution. Table comes with two clamping studs, two 45mm clamping bars and two t-nuts.

5602 Rotary Table, 3" Tilting

Tilting table 0° to 90°
3" diameter table rotates 360°
1:36 ratio or 10° per handwheel revolution
Scale reads to 15 minutes
Low profile - only 2.167" tall

Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 2.167" in the horizontal position. This precision ground graded cast iron table is graduated for a full 360°. The handwheel utilizes a 1:36 ratio resulting in 10° per handwheel revolution. Table tilts from 0° to 90° and locks into place. Table comes with two clamping studs, two 45mm clamping bars and two t-nuts.

5852 Rotary Table, 4" Digital Readout with Tailstock & Dividing Plate

Complete Rotary table and indexing solution
Includes 4" rotary table, diving plate, tailstock
Lock down clamps and t-slot nuts also included
Tailstock is adjustable in height
2 Morse taper center hole

This kit provides a complete rotary table and indexing solution. This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a fifteen second accuracy vernier scale is provided. The rotary table has lock down clamps. The tailstock is adjustable in height. The dividing plate set consists of one plate with two sets of holes. One circle has 15 holes and the other has 28 holes. This lets you divide a circle into 1/3 degree increments, among many other combinations. The lathe chuck adapter lets you mount a 3" 3- or 4-jaw lathe chuck on a rotary table with a 2 Morse taper center hole. There is an alignment boss that projects into the tapered hole for quick alignment. It is clamped to the rotary table with T-slot nuts that are included.

5853 Rotary Table, 4" Digital Readout with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck

Complete Rotary table and indexing solution
Includes 4" rotary table, diving plate, tailstock, and 3" 3-jaw chuck
Lock down clamps and t-slot nuts also included
Tailstock is adjustable in height
2 Morse taper center hole

This kit provides a complete rotary table and indexing solution. This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined and has a 2 Morse taper center hole. A micro collar graduated to one minute with a fifteen second accuracy vernier scale is provided. The rotary table has lock down clamps. The tailstock is adjustable in height. The dividing plate set consists of one plate with two sets of holes. One circle has 15 holes and the other has 28 holes. This lets you divide a circle into 1/3 degree increments, among many other combinations. The 3 inch 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws, and mounting bolts. The lathe chuck adapter lets you mount a 3" 3- or 4-jaw lathe chuck on a rotary table with a 2 Morse taper center hole. There is an alignment boss that projects into the tapered hole for quick alignment. It is clamped to the rotary table with T-slot nuts that are included.

5854 Rotary Table, 4" Digital Readout with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck

Complete Rotary table and indexing solution
Includes 4" rotary table, diving plate, tailstock, and 3" 4-jaw chuck
Lock down clamps and t-slot nuts also included
Tailstock is adjustable in height
2 Morse taper center hole

This kit provides a complete rotary table and indexing solution. This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a fifteen second accuracy vernier scale is provided. The rotary table has lock down clamps. The tailstock is adjustable in height. The dividing plate set consists of one plate with two sets of holes. One circle has 15 holes and the other has 28 holes. This lets you divide a circle into 1/3 degree increments, among many other combinations. The 3 inch 4-Jaw independent lathe chuck includes a chuck key, reversible jaws, and mounting bolts. The lathe chuck adapter lets you mount a 3" 3- or 4-jaw lathe chuck on a rotary table with a 2 Morse taper center hole. There is an alignment boss that projects into the tapered hole for quick alignment. It is clamped to the rotary table with T-slot nuts that are included.

1927 Rotary Table, 4" H/V

4" (100 mm) diameter
Use in horizontal or vertical position
Worm ratio is 72 to 1
10 second rotational accuracy
2 Morse taper center hole

This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged. The worm gear and center hole are hardened and ground. The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the vertical position. The worm ratio is 72 to 1. Flatness of clamping surface: 0.0006" TIR Parallelism of clamping surface to base: 0.0008" TIR Squareness of clamping surface to angle face: 0.0004" TIR Squareness of clamping surface to center slot: 0.0008" TIR Concentricity of center bore: 0.0008" TIR Maximum spacing error: 1 minute, 20 seconds.

5603 Rotary Table, 4" H/V, Economy

Horizontal or vertical use
4" diameter table rotates 360°
1:36 ratio or 10° per handwheel revolution
Scale reads to 15 minutes
Low profile - 55mm (2.17") tall

Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 55mm (2.17") in the horizontal position. This precision ground graded cast iron table is graduated for a full 360°. The handwheel utilizes a 1:36 ratio resulting in 10° per handwheel revolution. Table comes with two clamping studs, two 45mm clamping bars and two t-nuts.

1810 Rotary Table, 4" Precision

4" (100 mm) diameter
Use in horizontal or vertical position
Worm ratio is 72 to 1
10 second rotational accuracy
2 Morse taper center hole

This horizontal / vertical precision rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The table is graduated with a 360 degree scale. The rotary table is furnished with lock down clamps. This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw chucks. The model 1810 4” Precision Rotary Table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to mounting slot). The worm ratio is 72 to 1. Flatness of clamping surface: 0.0008". Parallelism of clamping surface to base: 0.0008". Squareness of clamping surface to angle face: 0.0012". Squareness of clamping surface to center slot: 0.0012". Concentricity of center bore: 0.0008" TIP.

2420 Rotary Table, 4" Precision, Digital Readout

4" (100 mm) diameter
Use in horizontal or vertical position
Worm ratio is 72 to 1
Digital angular readout with 1 minute (0.017 degree) resolution digital angular readout
2 Morse taper center hole

This horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The rotary table is furnished with lock down clamps. The digital readout displays degrees and minutes or decimal degrees. This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw chucks. The table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to mounting slot). The worm ratio is 72 to 1. Flatness of clamping surface: 0.0008". Parallelism of clamping surface to base: 0.0008". Squareness of clamping surface to angle face: 0.0012". Squareness of clamping surface to center slot: 0.0012". Concentricity of center bore: 0.0008" TIP.

5604 Rotary Table, 4" Tilting

Tilting table 0° to 90°
4" diameter table rotates 360°
1:36 ratio or 10° per handwheel revolution
Scale reads to 15 minutes
Low profile - 66mm (2.60") tall

Affordably priced rotary table suitable for bolt patterns, arched slots, cutting out flywheels and other medium precision jobs. The small size of the table is good for small milling machines. The table has a low profile of 66mm (2.60") in the horizontal position. This precision ground graded cast iron table is graduated for a full 360°. The handwheel utilizes a 1:36 ratio resulting in 10° per handwheel revolution. Table tilts from 0° to 90° and locks into place. Table comes with two clamping studs, two 45mm clamping bars and two t-nuts.

1931 Rotary Table, 4" with Tailstock & Dividing Plate

1927 H/V 4" Rotary Table
1799 Dividing plate set
1800 Tailstock

This rotary table package provides a complete rotary table and indexing solution.

2183 Rotary Table, 4" with Tailstock & Dividing Plate

1810 Precision 4" Rotary Table
1811 Dividing plate set
1812 Tailstock

This kit provides a complete rotary table and indexing solution.

3791 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck

1927 H/V 4" Rotary Table
1799 Dividing plate set
1800 Tailstock
1187 3" 3-Jaw chuck
3146 Lathe chuck adapter

This kit provides a complete rotary table and indexing solution.

3131 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck

1810 Precision rotary table (includes chuck adapter)
1811 Dividing plate set
1812 Tailstock
1187 3-Jaw 3" lathe chuck

This kit provides a complete rotary table and indexing solution. This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a fifteen second accuracy vernier scale is provided. The rotary table has lock down clamps. The tailstock is adjustable in height. The dividing plate set consists of one plate with two sets of holes. One circle has 15 holes and the other has 28 holes. This lets you divide a circle into 1/3 degree increments, among many other combinations. The 3 inch 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws, and mounting bolts. The lathe chuck adapter lets you mount a 3" 3- or 4-jaw lathe chuck on a rotary table with a 2 Morse taper center hole. There is an alignment boss that projects into the tapered hole for quick alignment. It is clamped to the rotary table with T-slot nuts that are included.

3792 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck

1927 H/V 4" Rotary Table
1799 Dividing plate set
1800 Tailstock
1175 3" 4-Jaw chuck
3146 Lathe chuck adapter

This kit provides a complete rotary table and indexing solution.

3132 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck

1810 Precision rotary table
1811 Dividing plate set
1812 Tailstock
1175 4-Jaw 3" lathe chuck

This kit provides a complete rotary table and indexing solution. This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a fifteen second accuracy vernier scale is provided. The rotary table has lock down clamps. The tailstock is adjustable in height. The dividing plate set consists of one plate with two sets of holes. One circle has 15 holes and the other has 28 holes. This lets you divide a circle into 1/3 degree increments, among many other combinations. The 3 inch 4-Jaw independent lathe chuck includes a chuck key, reversible jaws, and mounting bolts. The lathe chuck adapter lets you mount a 3" 3- or 4-jaw lathe chuck on a rotary table with a 2 Morse taper center hole. There is an alignment boss that projects into the tapered hole for quick alignment. It is clamped to the rotary table with T-slot nuts that are included.

1787 Rotary Table, 6"

6 inch horizontal / vertical rotary table
#2 Morse Taper center hole
3 T-slots with 0.43" channels
Height 3.1", vertical height 7.8"
Gear ratio 90:1, 10 second vernier reading

This 6" horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined in Taiwan and has a #2 Morse taper center hole. This 6" rotary table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. This horizontal/vertical rotary table has lock down clamps and the crank can be disengaged. The worm gear and center hole are hardened and ground. The 6" rotary table is 3.1" high when horizontal, and 7.8" when vertical. The centerline is 3.9" above the table when in the vertical position. The worm ratio is 90 to 1 and one rotation of the handle equals 4 degrees on the collar. There are three T-slots and each slot is 0.43" in width. Flatness of clamping surface: 0.0006" Parallelism of clamping surface to base: 0.0008" Squareness of clamping surface to angle face: 0.0004" Squareness of clamping surface to center slot: 0.0008" Concentricity of center bore: 0.0008" Dividing plates and a tailstock are available for this rotary table.

3566 Rotary Table, 6" with Tailstock & Dividing Plates

1787 6" Rotary Table
1801 Dividing Plate Set
1802 Tailstock

This kit provides a complete rotary table and indexing solution.